TIPS AND ADVICES
or else advices for crystal-clear water
You can download complete Swimming pool instruction handbook here 
432.5 KB
Dedicate 10 - 20 min time to your pool and water regularly once a week.
Once a week check levels of pH and Cl with hel of Duo test
-
when level is lower then 7,2, corrosion on metal and rustless parts of pool, eye and skin irritation may occur and the usage of chlorine increases
-
use pH+ product
-
-
when level is higher then 7,6, calcic sediments, sedimentary water, decrease in chlorine effect and irritation may occur
-
use pH- product
-
Once a week you insert Quattro tablets depending on pool size to basket placed in skimmer. 1 tablet is for 20 m3 of water. In case that level of pH does not oscillate, this tablet will keep your water clear and there will be no need to add other chemicals for the whole of following week (in case that temperatures are long term above 25°C, we reccomend to shorten the cyclus for inserting tablets into skimmer by approximately two days).
Minimum of once a week (in case of need more often) we suggest checking and cleaning of hair filter in front of pumping device and backward flush (cleaning) of filtration unit!!!
Clean the bottom of pool and water surface from dirt regularly
1. dirt sinking to bottom
-
sand, stones, rotten leaves, biological residues
-
objects fallen accidentaly or knowingly thrown-in objects
-
brown speckles, which are difficult to clean, may appear around metal objects in chlorine water
-
sharp objects are dangerous for swimmers as well as for the swimming pool foil
-
dirt can be removed by bottom leaf net with telescopic pole or by exhaustion (vacuum cleaning) with help of suction head, hose and telescopic pole or with automatic cleaner
2. dirt floating on water surface
-
insects, airborne seeds, grass-blades, hair, etc.
-
dirt can be removed with surface leaf net with telescopic pole
In case that pool is very dirty, do not forget to rinse the sand in filtration unit
6-WAY VALVE POSITIONS
FILTRATION
-
water from pool comes trough the filtration filling from top to bottom and returns cleaned back to pool via jets
DRAINAGE
-
pool is drained with help of pumping device, it is also used when cleaning severly dirty bottom, water is drained away from pool or into sewer system
ENCLOSURE
-
filtration eclosure
WASHING
-
is used when sand gets dirty, water comes trough filtration filling from bottom to top and dirt leaves the pool, after position „WASHING“, position „WASHING FINISHING“ must follow
CIRCULATION
-
water from pool only circulates (out of filter), is used for example when mixing chemicals
WASHING FINISHING
-
is ALWAYS!!! used after „WASHING“ position, water comes trought filtration filling from top to bottom, embeds sand and flows away from pool (sewer system)
HAIR FILTER CLEANING
Turn off the filtration, close all valves, pace the arm of 6-way valve into „CLOSED“ position. Unscrew cover of hair filter, take out basket and clean it properly. Replace basket to original position, screw the cover back on, place tha arm of 6-way valve into „FILTRATION“ position and open all valves.
BOTTOM DIRT EXHAUSTION - VACUUM CLEANING
-
almost every filtration unit can be connected to vacuum cleaner
-
for satisfactory functioning of vacuum cleaning, follow the next steps:
-
hair filter must be clean
-
filtration unit should be flushed
-
turn off all other suction piping - you will reach full pumping performace on suction place (skimmer) for vacuum cleaning hose
-
vacuum cleaning hose must be filled with water
-
filling of hose: place vacuum cleaner into water with hose extended and place hose slowly under water. Hose is filled from bottom and air comes out on the other end of hose. Attention: before you start with this, make sure that hose is empty before filling it up, because that is the only way the air can come out of hose
-
hose can be connected to sucction piping either directly to skimmer or via skim-vac
-
-
filtration unit is on
-
In case that you do not have .pdf browser, you can download it free of charge here: 